特种有杆泵系统

你的井是否有沙子问题, 腐蚀, 气锁, 或者其他一些独特的挑战, Harbison-Fischer^® 有经验吗?, 专业知识, and extensive range of products to ensure the best possible fit for each application. Our commitment to manufacturing precision consistently delivers the performance our customers need, 为我们赢得了在石油领域提供最佳泵的声誉.

了解更多

Delivers efficiency and long run life in gassy, sandy, and high-volume wells

广泛的申请安排

Our specialty pumps are available in various metallurgies and can be applied in the most challenging well conditions.

依靠卓越的性能

我们提供最好的表演, 最高质量, 设计出最安全的产品, 工程, 内部制造.

找一个合适的系统

杆式举升系统的成功与否取决于最初的设计. We work with you to understand your needs and then design and deliver the best system for your well.

新产品发布

Sand-Pro +

Are sand and abrasive particulates grinding away profits in your rod pumping operations? Harbison-Fischer’s patented Sand-Pro +™ pump has been 工程 specifically for wells producing high sand cuts and heavy, 磨料固体. Our unique design utilizes an electroformed screen with anti-clogging capabilities that effectively restrain heavy solids from the plunger’s leading edge. This progressive technology removes solids from the slippage flow to enhance fluid lubrication in the plunger and barrel regions of the pump, 导致行业领先的性能, 增加正常运行时间, 更长的泵寿命.

下载案例历史

下载正规信誉赌场下注说明书

可变滑移泵防止气锁 & 气体磅

抽油杆, positive-displacement pump that operates on the principle of pressure equalization just before the plunger reaches the top of the upstroke.

Engineered to promote steady and consistent production, especially in gassy wells
Industry-standard components allow the Variable Slippage™ pump to fit into nearly any well and make for a simple installation process
增加抛光杆的最小载荷，延长抽油杆的使用寿命

下载产品简介

两级中空阀杆泵处理双井条件

Combines ruggedness and versatility to deliver the optimal choice for your most challenging pumping conditions.

Uses an enhanced compression ratio for efficient gas handling capabilities while moving light-to-moderate sand without sticking
Protects the pump’s critical seal components from the abrasive particles that shorten pump run life
可在各种材料，表面处理和配置

下载产品简介

气体追赶泵获得最佳的天然气压缩比

专为最具挑战性的有杆泵气锁问题而设计.

Reduces 气锁 with a compound compression ratio that can produce almost pure gas
适用于深井或浅井
Available in materials and surface treatments for abrasive and corrosive conditions

Pampa气泵解决您最大的抽水挑战

Pampa™气泵可延长在恶劣的固体和气体条件下的运行寿命.

Reduces sticking from sand or other particulates while increasing the compression ratio for fewer gas problems
更大的柱塞和桶磨损面积增加了运行时间
可用于耐磨和耐腐蚀的材料和涂层 to ensure maximum product durability and life span

下载产品简介

排气泵把你的井往下抽，把气体分离出来

Improve reserve recovery with the industry’s most effective pump for casing fluid level draw down.

Avoid 气锁 and gas interference by venting gas from the fluid before it’s pumped into the tubing
与慢泵速兼容
适用于腐蚀性和磨蚀性环境的材料

配件有杆抽油系统:提高抽油作业效率

高回流压力调节器
- 在高达2000桶/天的流速下，抗冲蚀
- 完全符合NACE标准
- 耐腐蚀，包括台面腐蚀
- 提供可靠的背面压力，减少气体泄漏
Loc-No®柱塞
- 通过机械开启移动阀减少气锁
- 耐磨性好，密封面硬嵌
- 完整的柱塞总成简化了安装

了解更多关于我们的高流量业务流程再造

克服气锁和处理气体夹带在您的流体流

优化沙质或高固体条件下的生产

http://als.mac-ios-access.net/wp-content/uploads/Pamba-Pump-2.png

Sand-Pro +泵减少砂子和其他磨料造成的磨损

The patented Sand-Pro + pump utilizes an electroformed screen with anti-clogging capabilities that effectively restrain heavy solids from the plunger’s leading edge.

延长泵在重砂条件下的运行时间
允许泵像新的一样运行更长时间
具有成本效益且易于获得的有杆泵正规信誉赌场下注，适用于含砂井

下载案例历史

下载正规信誉赌场下注说明书

Sand-Pro泵减轻磨损的影响

The patented Sand-Pro™ pump uses a unique method of separating produced sand from the pressure sealing, 喷镀金属柱塞的前缘.

延长泵在重砂条件下的运行时间
主要使用标准泵组件，以提高成本
可用于耐磨和耐腐蚀的材料和涂层
可选两级中空阀杆设计，适用于气体和固体

下载产品简介

南美大草原泵找到解决粘砂的终极方案

A longer-than-normal plunger and shorter-than-normal barrel design handles sand sticking.

插入和油管泵类型的所有应用
可选择耐腐蚀和耐磨材料
可在三种配置:Pampa油管泵, 潘帕移动桶插入泵, 和Pampa固定桶插入泵

德州汽提泵指望脱衣舞娘井里的老朋友

专为浅层设计, 在生产期间关闭的桑迪井, 这通常会导致标准泵起砂和粘滞.

Sand stays in motion above the hold-down to minimize the chance of the pump being stuck in the tubing
Incorporates an outer jacket that shields the discharge ports and forces produced fluids out of the bottom of the jacket
可选择耐腐蚀和耐磨材料

三管泵用可靠的垃圾泵处理脏井

Large clearances between the plunger and barrels allow particulates to pass between the plunger and barrel without sticking or hanging up.

Sticking-pump problems are eliminated by large clearances between the pumps three tubes
Fluid is kept in motion above the hold-down to keep sand from sanding-in the pump
可配置普通或硬化桶

配件加强泵送作业

QuadPro™柱塞
- 采用独特的专有硬涂层
- 经ASTM G65测试耐磨性提高17倍
- 在富含固体的泵送环境中耐磨损
冲砂柱塞™
- 设计用于处理坚固的固体环境
- Down-stroke: Sand particles are forced away from the leading edge of the plunger due to the flushing action
- Upstroke: 关闭-fitting and beveled leading edge keeps particles from building up at the leading edge
刷砂封
- 工程用我们的高强度材料, the brush sand seal is a simple add-on attached directly below the fluid discharge flute
- 在油管和泵筒之间形成屏障, 防止沉淀物进入阀座接头的顶部
- 当泵到达阀座接头时不需要启动吗

Provides the benefits of an insert pump with a production capacity greater than a tubing pump for the same size tubing.

产生比标准油管泵更多的流体
Incorporates two barrels, two connected plungers, and a seal section between the barrels
可在移动桶和移动柱塞配置

超大型油管泵 & 下水道当你的API尺寸的油管泵不会削减它

These pumps are used when an API tubing pump plunger is not large enough to deliver the necessary production rate.

产生比标准油管泵更多的流体
配件可定制您的应用程序
在维修过程中，从油管排出液体
- 可在套筒型，勺子bill，和j型槽型

配件解决你最大的挑战

开关工具
- A dependable means of connecting and disconnecting sucker rods from the sucker rod pump
- Used to disconnect the rods above a stuck pump, eliminating a rod stripping job
- 可在右手和左手释放, as well as 腐蚀-resistant materials for tubing or casing sizes ranging from 1.9-in. 通过7½-.
抽油杆回退耦合器
- Used as a safety joint in the sucker rod string should the insert pump become stuck in the seating nipple
- 右手旋转抽油杆柱即可轻松释放
- 适用于所有抽油杆尺寸
剪切工具
- 用直线拉将抽油杆与泵分开
- 在释放不能旋转的玻璃纤维棒时特别有用
- Engineered to withstand the harshest conditions encountered in downhole reciprocating applications, 包括斜井, 标签, 流体磅, 以及腐蚀性环境
- 可在剪切释放拉力21,000 lb, 26,000 lb, 和33,适用于所有抽油杆销尺寸